I just found out that you can not restore the K2000 database even though you can backup the K2000 database. I want to be able to have all my settings if there is a catastrophic failure with my server or just need to refresh the hardware. I have to recreate all my labels, users, Ldap authentication, all my general settings, date time settings, relink all of my RSAs and K1000.

Add Dell Diagnostics or memory testing to the KPE recovery options.

It would be more practical to link tasks (pre-install, mid-install, post-install) to a deployment rather than an image. We are several people to deploy the same image but we use different pre and post-install tasks... If each person changes the tasks for each deployment of the same image we risk to have conflicts...
Actually we duplicate the image to have different tasks but it's not a good solution because the same wim stored many times on the K2000 Appliance.
Another solution would be to just duplicate a link on the wim file and not the entire wim.

The idea is to have the same process for the Imaging that the scripted installation. Then the image captured will be stored in the media Library and not in the deployment image tab. To create an image deployment job, we will select the image in a dropdown list.

It would be great to have an option to start the post install Task process on a test Client that has already the OS installed, so you don't have to run a full scripted install every time you want to test a postinstallation Task.

Having the ability to modify the post install tasks in each deployment separately so that it is not required to create multiple versions of a single script, or to re-script and replace the post install every time you want to change it. Basically, post install tasks able to accept parameters assigned in the deployment detail page.

On Targert device add a loading bar to check the in order to see where the image is deployed, the technician deploying the image may not be able to see the web interface of the appliance to check the progress status.

For exemple : 0% ----------------- to 100 %
just displays the percentage to copy from the image for example.

Allow user to either choose to sync all driver feed items from the K2000 appliance or instead not sync those files and make the Remote Site Appliance Driver Feed available to choose specific models to download drivers to the RSA.

Right now, there doesn't appear to be a way to join a multicast session from the KBE. This would be very helpful if we get a new shipment of PCs in, and set them all up. Then, we just tell the K2 to start the session and wait for 30 clients. This way we don't need to harvest mac addresses before hand... We can just deploy.

Currently, you can specify a "Boot Manager Password" on the K2000 and it is used on every RSA. I'd like to have different passwords for each RSA. Maybe on the K2000 under Deployments > Remote Sites > (select the RSA) then have a checkbox to override the default "Boot Manager Password" and enter it there.

Having a Xenserver Remote Site Appliance, or an ISO available so customers can install the appliance on their virtual environment.

I'd like full support for snmp so that the k2000 can be monitored for issues. Also full dell open manage support on the appliance.

If I create a new image and I want to sync that out to all my RSAs, it would be nice to have an option to add that item to sync to "selected RSAs" or "All RSAs" instead of having to add the image individually to each RSA, which is painful when you have 10+ RSAs.

Like its possible on K1000

Currently the "Limit average transfer rate to" setting uses Kilobytes per second and this should be set to Kilobits per second instead to be more inline with network throttling standards.

It would be great if it were possible to multicast to a hard drive with multiple partitions. In imaging our dual-boot computer labs we have to unicast the image which takes longer and uses more bandwidth. According to Dell it's a "software defect K2-5393", which In my opinion should be fixed.

Allow RSA's to run network scan and transfer results to K2 appliance

The K2000 can pull inventory lists from K1000 labels for automated deployments, but those lists are static. If the label group changes on the K1000, the group does not update on the K2000.

For example, if I had a group of systems I want to re-image on a weekly basis. If one of the computers is replaced, the automated deployment must be rebuilt.

Can the K2000 re-sync label members on the fly or even on a schedule?